1 | tting latency timer to 64 |
---|
2 | pci 0000:00:0b.0: setting latency timer to 64 |
---|
3 | pci 0000:00:0c.0: setting latency timer to 64 |
---|
4 | pci_bus 0000:00: resource 0 io: [0x00-0xffff] |
---|
5 | pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] |
---|
6 | pci_bus 0000:01: resource 0 io: [0xe000-0xefff] |
---|
7 | pci_bus 0000:01: resource 1 mem: [0xdff00000-0xdfffffff] |
---|
8 | pci_bus 0000:01: resource 2 mem: [0x0-0x0] |
---|
9 | pci_bus 0000:01: resource 3 io: [0x00-0xffff] |
---|
10 | pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] |
---|
11 | pci_bus 0000:02: resource 0 mem: [0x0-0x0] |
---|
12 | pci_bus 0000:02: resource 1 mem: [0x0-0x0] |
---|
13 | pci_bus 0000:02: resource 2 mem: [0x0-0x0] |
---|
14 | pci_bus 0000:02: resource 3 mem: [0x0-0x0] |
---|
15 | pci_bus 0000:03: resource 0 mem: [0x0-0x0] |
---|
16 | pci_bus 0000:03: resource 1 mem: [0x0-0x0] |
---|
17 | pci_bus 0000:03: resource 2 mem: [0x0-0x0] |
---|
18 | pci_bus 0000:03: resource 3 mem: [0x0-0x0] |
---|
19 | pci_bus 0000:04: resource 0 mem: [0x0-0x0] |
---|
20 | pci_bus 0000:04: resource 1 mem: [0x0-0x0] |
---|
21 | pci_bus 0000:04: resource 2 mem: [0x0-0x0] |
---|
22 | pci_bus 0000:04: resource 3 mem: [0x0-0x0] |
---|
23 | NET: Registered protocol family 2 |
---|
24 | IP route cache hash table entries: 32768 (order: 5, 131072 bytes) |
---|
25 | TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
---|
26 | TCP bind hash table entries: 65536 (order: 7, 524288 bytes) |
---|
27 | TCP: Hash tables configured (established 131072 bind 65536) |
---|
28 | TCP reno registered |
---|
29 | NET: Registered protocol family 1 |
---|
30 | checking if image is initramfs... it is |
---|
31 | Freeing initrd memory: 864k freed |
---|
32 | highmem bounce pool size: 64 pages |
---|
33 | VFS: Disk quotas dquot_6.5.2 |
---|
34 | Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
---|
35 | msgmni has been set to 1731 |
---|
36 | alg: No test for cipher_null (cipher_null-generic) |
---|
37 | alg: No test for digest_null (digest_null-generic) |
---|
38 | alg: No test for compress_null (compress_null-generic) |
---|
39 | alg: No test for fcrypt (fcrypt-generic) |
---|
40 | alg: No test for stdrng (krng) |
---|
41 | async_tx: api initialized (async) |
---|
42 | io scheduler noop registered |
---|
43 | io scheduler anticipatory registered |
---|
44 | io scheduler deadline registered |
---|
45 | io scheduler cfq registered (default) |
---|
46 | pci 0000:00:00.0: Found enabled HT MSI Mapping |
---|
47 | pci 0000:00:00.0: Found enabled HT MSI Mapping |
---|
48 | pci 0000:00:00.0: Found enabled HT MSI Mapping |
---|
49 | pci 0000:00:00.0: Found enabled HT MSI Mapping |
---|
50 | pci 0000:00:00.0: Found enabled HT MSI Mapping |
---|
51 | pci 0000:00:00.0: Found enabled HT MSI Mapping |
---|
52 | pci 0000:00:00.0: Found enabled HT MSI Mapping |
---|
53 | pci 0000:00:0d.0: Boot video device |
---|
54 | pcieport-driver 0000:00:09.0: setting latency timer to 64 |
---|
55 | pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X |
---|
56 | pcieport-driver 0000:00:0b.0: setting latency timer to 64 |
---|
57 | pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X |
---|
58 | pcieport-driver 0000:00:0c.0: setting latency timer to 64 |
---|
59 | pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X |
---|
60 | pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
---|
61 | vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 1536k, total 65536k |
---|
62 | vesafb: mode is 1024x768x8, linelength=1024, pages=3 |
---|
63 | vesafb: protected mode interface info at c000:d560 |
---|
64 | vesafb: pmi: set display start = c00cd596, set palette = c00cd600 |
---|
65 | vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 |
---|
66 | vesafb: scrolling: redraw |
---|
67 | vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 |
---|
68 | Console: switching to colour frame buffer device 128x48 |
---|
69 | fb0: VESA VGA frame buffer device |
---|
70 | isapnp: Scanning for PnP cards... |
---|
71 | isapnp: No Plug & Play device found |
---|
72 | Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
---|
73 | serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
---|
74 | 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
---|
75 | Floppy drive(s): fd0 is 1.44M |
---|
76 | FDC 0 is a post-1991 82077 |
---|
77 | brd: module loaded |
---|
78 | loop: module loaded |
---|
79 | input: Macintosh mouse button emulation as /devices/virtual/input/input0 |
---|
80 | Uniform Multi-Platform E-IDE driver |
---|
81 | amd74xx 0000:00:06.0: UDMA133 controller |
---|
82 | amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2) |
---|
83 | amd74xx 0000:00:06.0: IDE port disabled |
---|
84 | amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround. |
---|
85 | amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later |
---|
86 | ide0: BM-DMA at 0xfff0-0xfff7 |
---|
87 | Probing IDE interface ide0... |
---|
88 | hda: Optiarc DVD RW AD-7170A, ATAPI CD/DVD-ROM drive |
---|
89 | hdb: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive |
---|
90 | hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 |
---|
91 | hda: UDMA/66 mode selected |
---|
92 | hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 |
---|
93 | hdb: UDMA/33 mode selected |
---|
94 | ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
---|
95 | ide-gd driver 1.18 |
---|
96 | ide-cd driver 5.00 |
---|
97 | ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache |
---|
98 | Uniform CD-ROM driver Revision: 3.20 |
---|
99 | ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache |
---|
100 | Driver 'sd' needs updating - please use bus_type methods |
---|
101 | Driver 'sr' needs updating - please use bus_type methods |
---|
102 | sata_nv 0000:00:08.0: version 3.5 |
---|
103 | ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 |
---|
104 | sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 |
---|
105 | sata_nv 0000:00:08.0: setting latency timer to 64 |
---|
106 | scsi0 : sata_nv |
---|
107 | scsi1 : sata_nv |
---|
108 | ata1: SATA max UDMA/133 cmd 0xdd80 ctl 0xdd00 bmdma 0xdb00 irq 23 |
---|
109 | ata2: SATA max UDMA/133 cmd 0xdc00 ctl 0xdb80 bmdma 0xdb08 irq 23 |
---|
110 | ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
---|
111 | ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7 |
---|
112 | ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) |
---|
113 | ata1.00: configured for UDMA/133 |
---|
114 | scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 |
---|
115 | sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) |
---|
116 | sd 0:0:0:0: [sda] Write Protect is off |
---|
117 | sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
---|
118 | sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
---|
119 | sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) |
---|
120 | sd 0:0:0:0: [sda] Write Protect is off |
---|
121 | sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
---|
122 | sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
---|
123 | sda: sda1 sda2 < sda5 > sda3 sda4 |
---|
124 | sd 0:0:0:0: [sda] Attached SCSI disk |
---|
125 | PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 |
---|
126 | PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp |
---|
127 | serio: i8042 KBD port at 0x60,0x64 irq 1 |
---|
128 | mice: PS/2 mouse device common for all mice |
---|
129 | md: linear personality registered for level -1 |
---|
130 | md: raid0 personality registered for level 0 |
---|
131 | md: raid1 personality registered for level 1 |
---|
132 | md: raid10 personality registered for level 10 |
---|
133 | raid6: int32x1 979 MB/s |
---|
134 | raid6: int32x2 1035 MB/s |
---|
135 | raid6: int32x4 957 MB/s |
---|
136 | raid6: int32x8 702 MB/s |
---|
137 | input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 |
---|
138 | raid6: mmxx1 2139 MB/s |
---|
139 | raid6: mmxx2 3940 MB/s |
---|
140 | raid6: sse1x1 2176 MB/s |
---|
141 | raid6: sse1x2 3691 MB/s |
---|
142 | raid6: sse2x1 3541 MB/s |
---|
143 | raid6: sse2x2 4884 MB/s |
---|
144 | raid6: using algorithm sse2x2 (4884 MB/s) |
---|
145 | md: raid6 personality registered for level 6 |
---|
146 | md: raid5 personality registered for level 5 |
---|
147 | md: raid4 personality registered for level 4 |
---|
148 | md: multipath personality registered for level -4 |
---|
149 | device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com |
---|
150 | cpuidle: using governor ladder |
---|
151 | TCP cubic registered |
---|
152 | Initializing XFRM netlink socket |
---|
153 | NET: Registered protocol family 17 |
---|
154 | Using IPI No-Shortcut mode |
---|
155 | Freeing unused kernel memory: 368k freed |
---|
156 | kjournald starting. Commit interval 5 seconds |
---|
157 | EXT3-fs: mounted filesystem with ordered data mode. |
---|
158 | input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
---|
159 | ACPI: Power Button (FF) [PWRF] |
---|
160 | input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 |
---|
161 | ACPI: Power Button (CM) [PWRB] |
---|
162 | k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 |
---|
163 | sd 0:0:0:0: Attached scsi generic sg0 type 0 |
---|
164 | rtc_cmos 00:02: RTC can wake from S4 |
---|
165 | rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 |
---|
166 | rtc0: alarms up to one year, y3k, 114 bytes nvram |
---|
167 | i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4d00 |
---|
168 | i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4e00 |
---|
169 | parport_pc 00:07: reported by Plug and Play ACPI |
---|
170 | parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] |
---|
171 | forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62. |
---|
172 | ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 |
---|
173 | forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 |
---|
174 | forcedeth 0000:00:07.0: setting latency timer to 64 |
---|
175 | processor ACPI_CPU:00: registered as cooling_device0 |
---|
176 | processor ACPI_CPU:01: registered as cooling_device1 |
---|
177 | Linux agpgart interface v0.103 |
---|
178 | ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
---|
179 | ppdev: user-space parallel port driver |
---|
180 | b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully |
---|
181 | flexcop-pci: will use the HW PID filter. |
---|
182 | flexcop-pci: card revision 2 |
---|
183 | ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 |
---|
184 | b2c2_flexcop_pci 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19 |
---|
185 | DVB: registering new adapter (FlexCop Digital TV device) |
---|
186 | b2c2-flexcop: MAC address = 00:d0:d7:0e:2f:5b |
---|
187 | b2c2-flexcop: i2c master_xfer failed |
---|
188 | b2c2-flexcop: i2c master_xfer failed |
---|
189 | CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) |
---|
190 | CX24123: wrong demod revision: 87 |
---|
191 | forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:93:fa:e0:1a |
---|
192 | forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 |
---|
193 | ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 |
---|
194 | ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 |
---|
195 | ehci_hcd 0000:00:02.1: setting latency timer to 64 |
---|
196 | ehci_hcd 0000:00:02.1: EHCI Host Controller |
---|
197 | ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 |
---|
198 | ehci_hcd 0000:00:02.1: debug port 1 |
---|
199 | ehci_hcd 0000:00:02.1: cache line size of 64 is not supported |
---|
200 | ehci_hcd 0000:00:02.1: irq 21, io mem 0xdfe7ec00 |
---|
201 | ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
---|
202 | usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
---|
203 | usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
---|
204 | usb usb1: Product: EHCI Host Controller |
---|
205 | usb usb1: Manufacturer: Linux 2.6.29.1-smp ehci_hcd |
---|
206 | usb usb1: SerialNumber: 0000:00:02.1 |
---|
207 | usb usb1: configuration #1 chosen from 1 choice |
---|
208 | hub 1-0:1.0: USB hub found |
---|
209 | hub 1-0:1.0: 10 ports detected |
---|
210 | ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 |
---|
211 | HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20 |
---|
212 | HDA Intel 0000:00:05.0: setting latency timer to 64 |
---|
213 | ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
---|
214 | b2c2-flexcop: found 'ST STV0299 DVB-S' . |
---|
215 | DVB: registering adapter 0 frontend 3744 (ST STV0299 DVB-S)... |
---|
216 | b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete |
---|
217 | usb 1-1: new high speed USB device using ehci_hcd and address 2 |
---|
218 | nvidia: module license 'NVIDIA' taints kernel. |
---|
219 | usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 |
---|
220 | usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
---|
221 | usb 1-1: Product: USB2.0 Hub |
---|
222 | usb 1-1: configuration #1 chosen from 1 choice |
---|
223 | hub 1-1:1.0: USB hub found |
---|
224 | hub 1-1:1.0: 4 ports detected |
---|
225 | usb 1-2: new high speed USB device using ehci_hcd and address 3 |
---|
226 | hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... |
---|
227 | usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 |
---|
228 | usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
---|
229 | usb 1-2: Product: USB2.0 Hub |
---|
230 | usb 1-2: configuration #1 chosen from 1 choice |
---|
231 | hub 1-2:1.0: USB hub found |
---|
232 | hub 1-2:1.0: 4 ports detected |
---|
233 | usb 1-2.1: new low speed USB device using ehci_hcd and address 4 |
---|
234 | ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
---|
235 | ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 |
---|
236 | ohci_hcd 0000:00:02.0: setting latency timer to 64 |
---|
237 | ohci_hcd 0000:00:02.0: OHCI Host Controller |
---|
238 | ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 |
---|
239 | ohci_hcd 0000:00:02.0: irq 23, io mem 0xdfe7f000 |
---|
240 | usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
---|
241 | usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
---|
242 | usb usb2: Product: OHCI Host Controller |
---|
243 | usb usb2: Manufacturer: Linux 2.6.29.1-smp ohci_hcd |
---|
244 | usb usb2: SerialNumber: 0000:00:02.0 |
---|
245 | usb usb2: configuration #1 chosen from 1 choice |
---|
246 | hub 2-0:1.0: USB hub found |
---|
247 | hub 2-0:1.0: 10 ports detected |
---|
248 | ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22 |
---|
249 | nvidia 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 22 (level, low) -> IRQ 22 |
---|
250 | nvidia 0000:00:0d.0: setting latency timer to 64 |
---|
251 | NVRM: loading NVIDIA UNIX x86 Kernel Module 180.22 Tue Jan 6 09:29:08 PST 2009 |
---|
252 | usb 1-2.1: New USB device found, idVendor=09da, idProduct=000a |
---|
253 | usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
---|
254 | usb 1-2.1: Product: PS/2+USB Mouse |
---|
255 | usb 1-2.1: Manufacturer: A4Tech |
---|
256 | usb 1-2.1: configuration #1 chosen from 1 choice |
---|
257 | usbcore: registered new interface driver hiddev |
---|
258 | usbcore: registered new interface driver usbhid |
---|
259 | usbhid: v2.6:USB HID core driver |
---|
260 | input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1:1.0/input/input4 |
---|
261 | a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:02.1-2.1/input0 |
---|
262 | EXT3 FS on sda3, internal journal |
---|
263 | lp0: using parport0 (interrupt-driven). |
---|
264 | lp0: console ready |
---|
265 | kjournald starting. Commit interval 5 seconds |
---|
266 | EXT3 FS on sda5, internal journal |
---|
267 | EXT3-fs: mounted filesystem with ordered data mode. |
---|
268 | Adding 1999992k swap on /.site/.swap. Priority:-1 extents:511 across:10850476k |
---|
269 | forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X |
---|
270 | eth0: no link during initialization. |
---|
271 | eth0: link up. |
---|
272 | NET: Registered protocol family 10 |
---|
273 | lo: Disabled Privacy Extensions |
---|
274 | eth0: no IPv6 routers present |
---|
275 | IRQ 22/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs |
---|
276 | eth0: link down. |
---|
277 | eth0: link up. |
---|
278 | eth0: link down. |
---|
279 | eth0: link up. |
---|
280 | ISO 9660 Extensions: Microsoft Joliet Level 3 |
---|
281 | ISO 9660 Extensions: RRIP_1991A |
---|
282 | UDP: short packet: From 0.234.0.247:33480 25649/109 to 185.14.248.248:53318 |
---|
283 | UDP: short packet: From 0.234.0.247:35407 25649/109 to 185.14.248.248:53318 |
---|
284 | |
---|
285 | ... |
---|
286 | |
---|
287 | eth0: link down. |
---|
288 | eth0: link up. |
---|
289 | NVRM: Xid (0000:0d): 13, 0002 beef3097 00004497 00000208 0000012b 00000002 |
---|
290 | NVRM: Xid (0000:0d): 13, 0002 beef3097 00004497 00000208 0000012b 00000002 |
---|
291 | NVRM: Xid (0000:0d): 13, 0002 beef3097 00004497 00000208 0000012c 00000002 |
---|
292 | NVRM: Xid (0000:0d): 13, 0002 beef3097 00004497 00000208 0000012c 00000002 |
---|
293 | NVRM: Xid (0000:0d): 13, 0002 beef3097 00004497 00000208 0000012b 00000002 |
---|
294 | NVRM: Xid (0000:0d): 13, 0002 beef3097 00004497 00000208 0000012b 00000002 |
---|
295 | NVRM: Xid (0000:0d): 13, 0002 beef3097 00004497 00000208 0000012c 00000002 |
---|
296 | NVRM: Xid (0000:0d): 13, 0002 beef3097 00004497 00000208 0000012c 00000002 |
---|
297 | |
---|
298 | ... |
---|
299 | |
---|
300 | eth0: link down. |
---|
301 | eth0: link up. |
---|
302 | eth0: link down. |
---|
303 | eth0: link up. |
---|
304 | eth0: link down. |
---|
305 | eth0: link up. |
---|
306 | mc[29410]: segfault at 69633d01 ip 080a1041 sp bff4df50 error 4 in mc[8048000+b9000] |
---|
307 | mc[29633]: segfault at 12 ip 080a09c3 sp bfd28d68 error 4 in mc[8048000+b9000] |
---|
308 | mc[29914]: segfault at 79742f6d ip b7d65939 sp bff3bedc error 6 in libc-2.7.so[b7cfa000+145000] |
---|
309 | mc[30444]: segfault at 69732e3b ip b7df9e94 sp bf9d12bc error 4 in libc-2.7.so[b7d8e000+145000] |
---|
310 | mc[30470]: segfault at 69732e3b ip b7ca2e94 sp bfc7855c error 4 in libc-2.7.so[b7c37000+145000] |
---|
311 | mc[30750]: segfault at 122 ip 080a339c sp bf93da30 error 4 in mc[8048000+b9000] |
---|
312 | mc[30813]: segfault at c ip b7d13e94 sp bfcebddc error 4 in libc-2.7.so[b7ca8000+145000] |
---|
313 | mcedit[30919]: segfault at 69732e3b ip b7dd4e94 sp bfcabcac error 4 in libc-2.7.so[b7d69000+145000] |
---|
314 | mcedit[30945]: segfault at 69732e3b ip b7d60e94 sp bf83502c error 4 in libc-2.7.so[b7cf5000+145000] |
---|
315 | mcedit[31210]: segfault at bff0e4ec ip b7c6c8a3 sp bfc458ac error 4 in libc-2.7.so[b7c03000+145000] |
---|
316 | mcedit[31522]: segfault at bff084ec ip b7c668a3 sp bf83d4ac error 4 in libc-2.7.so[b7bfd000+145000] |
---|
317 | mcedit[31528]: segfault at c00aa4ec ip b7e088a3 sp bfedfb4c error 5 in libc-2.7.so[b7d9f000+145000] |
---|
318 | mcedit[31533]: segfault at c00ae4ec ip b7e0c8a3 sp bffe3c4c error 5 in libc-2.7.so[b7da3000+145000] |
---|